Table of Contents
Advertisement
Mode "ON" and "OFF" commands.
Example:
The example below was generated by the
following output:
El Ni<ESC>Nn-o
2<ESCNO/<ESC>NOI
c.s
Special Printer Features
The ESCape sequence commands in this section allow
access to special printer features such as Graphics Mode
and Printer Reset Commands.
• TOTAL RESETIRESTORE causes the printer to re-
turn to ALL default conditions.
• ALTERNATE TOTAL RESETIRESTORE provides
an alternate method of returning the printer to its
default conditions.
• NO PRINT "ON" allows commands to be entered
but not printed.
• NO PRINT "OFF" causes printing to resume.
• PRINTWHEEL POSITION 002 (and) 004 allows you
G-28
Qume Emulation Mode
Advertisement
Table of Contents
