Table of Contents
Advertisement
• SELECT HIGH-SPEED DOUBLE-DENSITY MODE
places the printer in Graphics Mode and specifies the
number of columns to be reserved for graphics data.
• SELECT
LOW-SPEED
DOUBLE-DENSITY
MODE places the printer in Graphics Mode and spec-
ifies the number of columns to be reserved for graph-
ics data. There is no restriction on speed with the
laser printer.
• SELECT QUADRUPLE-DENSITY MODE places the
printer in Graphics Mode and specifies the number
of columns to be reserved for graphics data.
• SELECT VARIABLE DENSITY MODE places the
printer in Graphics Mode and allows you to change
densities as necessary.
• DEFINE CHARACTER IN RAM AREA allows you
to create download fonts or single characters.
• SELECT CHARACTER SET allows you to print
with user-defined characters.
• COPY ROM CHARACTERS TO USER RAM will
access characters that have not been defined in RAM
from the printer ROM when printing with user-defined
character sets.
• ENABLE PRINTING OF CODES (DECIMAL 0 -
31) causes certain control codes in the decimal 0-31
range to be printed.
• DISABLE PRINTING OF CODES (DECIMAL 0 -
31) disables printing of control codes in the decimal
0-31 range.
• ENABLE PRINTING OF CODES (DECIMAL 128 -
159) allows you to redefine the "High-Order Control
Codes" (decimal 128-159).
Appendix E
E-35
Advertisement
Table of Contents
