Table of Contents
Advertisement
f<or more detailed instructions for making this change, see:
Page Orientation (Keypad)
Part III Section K.2
Group 1 Option 9
You may also make this change through a software com-
mand. For the instructions for using this method see:
Part IV Section C
Page Orientation (Software)
F
Page Margins
Page margins can be set in the printer but may also be
set by the software package you are using. Page margins
set using a software package will take precedence over the
margins set in the printer.
There is also a limit of approximately 3mm (0.1")
at the top of the page, 6mm (0.25") at the left and
bottom of the page, and 9mm (0.3") at the right of
the page where no characters may be printed. This
limit, imposed by the printing mechanism, must be
taken into account when specifying page margins.
F.1
Default Margins
The printer's default page margins are 0 cm for the top,
bottom, left and right margins. If you wish to use your
software package to set the margins, your printer is prop-
erly set.
Tutorial
2-15
Advertisement
Table of Contents
