Table of Contents
Advertisement
Examples:
<ESC>A<EM>
Set line spacing to 25n2"
<ESC>A<VT>
Set line spacing to Iln2"
I
<ESC>3<n>
I
SET LINE SPACING TO n/216 INCH
This command allows you to establish your own line spac-
ing in 1/216 inch increments. This is a very fine spacing
which closes the dot-gaps in Graphics Mode. The range
of values for On' in the command are 0-255.
Examples:
<ESC>3B
Set line spacing to 66/216"
<ESC>3<CR>
Set line spacing to 13/216"
I
<ESC>J<n>
I
SINGLE n/216 <LF> WITHOUT <CR>
This command causes an IMMEDIATE line feed of n/216
inch. The command is only executed if the "<ESC>A"
command (described above) for variable line spacing is
controlling line spacing. The <ESC>J command is valid
for one line only. The printer is returned to the current
/
line spacing after the command is acted on.
I
<ESC>j<n>
I
SINGLE n/216 REVERSE <LF>
WITHOUT <CR>
This command causes an IMMEDIATE line feed of n/216
inch "up" the page. The command is only executed if the
<ESC>A command for variable line spacing is controlling
line spacing. The <ESC>j command is valid for one line
only. The printer is returned to the current line spacing
after the command is acted on. Unlike the FX-80, this
command may be used when printing mailing labels.
E-22
Appendix E
Advertisement
Table of Contents
