Table of Contents
Advertisement
B
Fixing Assembly Cleaner
The fixing assembly cleaner is a long plastic stick with
a felt pad along its length. This pad is used to keep the
fixing roller clean. It should be replaced whenever the
print cartridge is replaced.
B.t
Replacing the Fixing Assembly Cleaner
1. Raise the upper half of the printer. Lift the green
fixing assembly cover using the extended lip on the
right front.
2. The fixing assembly cleaner is in a groove in the
cover. Grasp the cleaner by the green felt-covered
extension and slide it out. Throw the old cleaner
away_ A void touching the felt which covers the stick.
3. For details, cautions and illustrations, see the instruc-
tions included with the print cartridge.
4. Clean the fixing roller as described in Section B.2.
5-4
Maintenance and Troubleshooting
Advertisement
Table of Contents
