Table of Contents
Advertisement
8
Attach Manual Feed Tray
to nubs on rear of printer.
Tray must be tilled
slightly to fit over nubs.
6
7
Move printer to selected
location. Lift using han-
dles (front and rear).
Select a suitable loca-
tion for the printer. Be
sure to allow enough
space to open printer,
replace Print Cartridge,
remove Paper Cassette,
and to access the Man-
ual Fsed area of the
printer. Refer to Printer
Specifications
In
Appendix G.
Installation
9
Fit nubs on Output
Stacker Tray Into holes
on front of printer.
11
Connect Power Cord to
outlet.
10
Connect Printer inter-
face Cable (not included)
to printer and computer.
Cable may be purchased
from dealsr. Refer to
Part III of manual for in-
structions on Interface
setup.
1-3
Advertisement
Table of Contents
