is "OFF", character widths are slightly reduced to maintain
column widths for Tabbing. Bold Overprint Mode may
be used with this command to achieve both a Vertical and
Horizontal emboldening of the characters.
I
<ESC>R
I
SHADOW PRINT "OFF"
Shadow Print is terminated by this command.
Examples:
The example below was generated by the
following output:
<ESC>IQume Emulation allows you to
underline,<ESC>J <ESC>Klembolden,
<ESC>Mor print in<ESC>Q"shadow
print."<ESC>R
Qume Emulation al lows you to
under I Ine. embolden,
or print In·shadow
prlnt.-
I
<ESC>N
I
NO ESCAPEMENT/PRINT POSI-
TION MOVE
This command may be used to print two different char-
acters in the same print position. The command actually
causes the print position to remain stationary after print-
ing the character immediately following the command so
that a second character may be over-printed on the first.
Zeroes with slashes and special symbols may be printed
in this manner. This command is affected by Graphics
Qume Emulation Mode
G-27