Table of Contents
Advertisement
Appendix H
HP LaserJet PLUS
Emulation Mode
Introduction
This appendix covers the commands supported by the
QMS printer whenever it is in HP LaserJet PLUS Em-
ulation Mode.
If you are using a word processor, you do not need to
read this section. Once your word processor is correctly
installed and is configured to work with a printer that em-
ulates a LaserJet PLUS printer, you may use your word
processor commands to edit and send your files to the
QMS printer.
The explanations of the supported LaserJet commands are
given for those of you who may be writing computer pro-
grams and must actually use these commands.
In addition to the commands explained in this section,
there are Printer Software Commands that are also hon-
ored when in LaserJet PLUS Emulation Mode. With these
software commands you may change fonts, change emula-
tion modes, change page orientation, change paper source,
change the copy count, access the Extended Printer Con-
trol or redefine the command or font translation tables.
The software commands are a special feature of the QMS
printer and are very useful. These commands are ex-
plained in Part IV of this manual.
HP Emulation Mode
H-I
Advertisement
Table of Contents
