QMS SmartWriter 80+ User Manual page 359

I
<ESC>Vll
l
ll
2
ll
3
1
RELATIVE VERTICAL MOTION
This command allows the print position to be moved 1/48
inch to 1791/48 inch, either above or below, the current
position. The values in nl, n2 and n3 indicate how far
and in which direction the print position is to be moved.
Determine how many l/48th inches you wish to move and
if the move is to be above or below the current position.
Determine the values for nl, n2 and n3 in the same manner
as for "Relative Horizontal Motion" using the three charts
on the previous page.
I
<ESC>,
I
AUTOMATIC LINE FEED "ON"
This command is used if you want an Automatic Line Feed
whenever a Carriage Return is executed. This function
may also be set by using the keypad to configure Group
Q
Option 4.
I
<ESC>.
I
AUTOMATIC LINE FEED "OFF"
This command turns the Automatic Line Feed Mode "OFF".
The default for this feature is "OFF". This command does
not affect the setting of Group
Q
Option 4.
I
<ESC>61
BACKWARD PRINTING
This command reverses the normal print position move-
ment of left-to-right to right-to-Ieft. It also causes the
Backspace command to be reversed. Horizontal Tab com-
mands are not affected.
I
<Esc>sl
BACKWARD PRINTING "OFF"
This command causes Backward Printing Mode to be ter-
minated. A Carriage Return command will also return
printing to forward motion.
Qume Emulation Mode
0-23