Table of Contents
Advertisement
Font height
Primary vs. secondary font
E.2
Print
Position Commands
This set of commands is used to change the current print
position.
I
<SP>
I
Space
This control code causes the print position to move right
one column at the current print pitch. The distance moved
is the default pitch for the current font, unless this has
been superceded by a Set HMI command.
[<iiS>J
Backspace
This control code causes the print position to move left
one column at the current print pitch. The distance moved
is the default pitch for the current font, unless this has
'\
been superceded by a Set HMI command.
I
<CR>
I
Carriage Return
This control code causes the print position to move back
to the left text margin on the current line. A line feed
may also be carried out, depending on the most recent
Line Termination command.
I
<LF>
I
Line Feed
This control code causes the print position
to
move down
to the next line without changing the horizontal position.
A carriage return may also be carried out, depending on
the most recent Line Termination command.
H-20
HP Emulation Mode
Advertisement
Table of Contents
