Table of Contents
Advertisement
C
Supported Epson Commands
The commands which are supported by the printer are
described on the following pages. If you have files that
already contain Epson commands, you need not make any
changes to these files before sending them
to
the laser
printer. Any Epson commands that are not supported by
the printer will be absorbed and will not interrupt printing.
D
Print Width Commands
The Print Width Commands are used to change character
and line spacing.
• ENABLE ELITE MODE causes printing at 12 char-
acters per inch.
• DISABLE ELITE MODE allows a different Print
Width Command to be selected or returns the printer
to Pica Mode.
• ENABLE COMPRESSED MODE causes printing at
17 characters per inch.
• DISABLE COMPRESSED MODE allows a different
Print Width Command to be selected or returns the
printer to Pica Mode.
The printer emulates the Pica, Elite and Compressed print
widths of the Epson FX-80. Like the FX-80, only one
Print Width can be used at a time. Pica Mode is the factory
default power-up Print Width. In Pica Mode, you can print
10 characters per inch (cpi). Unlike the Epson printer, the
printer has no limit on the number of characters per line
that you may print. The number of characters that will fit
on a line is determined by the font size, the print mode
(cpi) selected, the page size, and the page orientation.
Selecting a new Print Width may not be honored at all
Appendix E
E-7
Advertisement
Table of Contents
