Table of Contents
Advertisement
I
<ESC >9
I
Clear Side Margins
This command sets the left and right margins to the de-
faults listed previously. The current print position is not
affected.
E
Print Position
E.I
Print Spacing Commands
Vertical line spacing can be specified in either lines per
inch or vertical motion index (VMI). The first method is
easier to calculate, but the second method permits the fine
control of line spacing needed in typesetting applications.
Regardless of which method is used, the vertical line spac-
ing affects the following actions:
Line feed
Half line feed
induding line feeds introduced by the current Line Termi.
nation mode.
The default horizontal spacing for the current font can be
over-ridden by changing the horizontal motion index or
HMI (see Horizontal Spacing).
I
<ESC>&lnlD
I
Set LineslInch
This command sets the vertical spacing in lines per inch,
where
nl
is the desired value. The command is ignored
unless this value is one of those supported by the printer:
1, 2, 3, 4, 6, 8, 12, 16, 24 or 48.
For example:
H-18
HP Emulation Mode
Advertisement
Table of Contents
