Table of Contents
Advertisement
J.3
Option 3 - Hex Dump
This Option is used to put the printer into hex dump
mode - a diagnostic mode that allows you to examine
the exact data being received by the printer. When in
hex dump mode, the printer prints the hex values of the
data it receives. All characters' values, including control
characters, are printed. This is useful for determining ex-
actly what characters the printer is actually receiving. Hex
dump data prints on the left side of the page. Matching
print data appears on the right side of the page. Control
characters (values less than hex 20) and any unprintable
characters appear on the right side as periods. To exit
the hex dump mode, turn this Option off and toggle any
Option O.
Normal Operationt
Hex Dump Mode
GROUP
o
J.4
Option 4 - Form Feed/Carriage Re-
turn
This Option controls how the printer interprets Form Feed
( <FF» characters that are followed by Carriage Return
( <CR> ) characters.
If
carriage returns following form feeds
are ignored, printing will start at the top margin.
<FF><CR>t
<FF>
GROUP
o
Printer Setup
3-35
Advertisement
Table of Contents
