Table of Contents
Advertisement
I <ESC>MI
ENABLE ELITE MODE
Elite Mode prints at 12 cpi. This Mode takes priority
over all other Print Widths.
You may access Single-
Strike, Double-Strike, Italic, Superscript, and Subscript
Print Qualities when in Elite Mode. You may not use
Pica, Proportional, Emphasized, or Compressed Modes
when in Elite Mode.
If
the command to access any
of these modes is sent before Elite Mode is disabled,
the command will be ignored. Printing will continue
in Elite Mode.
I <Esc>pl
DISABLE ELITE MODE
This command turns Elite Mode off and allows a different
Print Width to be selected. If no other Print Width is
specified, printing will resume in Pica Mode.
I <ESC><SI>
or
<SI>
I
ENABLE COMPRESSED MODE
This command (decimal 15) turns on Compressed Mode.
Compressed Mode prints at 17 cpi and will take priority
over Pica Print Width. Any of the Print Quality commands
may be used when in this Mode. Compressed Mode may
be set as the default printing mode for Epson Emulation
by using the keypad to configure Group E Option 1.
Appendix E
E-9
Advertisement
Table of Contents
