Table of Contents
Advertisement
You may also make this change through a software com-
mand For the instructions for using this method see:
Part IV Section B
Selecting a Font (Software)
H.2.2
Changing Power-Up Fonts
The printer powers up in the default font of each orienta-
tion (portrait or landscape). The printer will print in these
fonts until a new current font is specified. Each default
font (portrait and landscape) can be changed so that the
printer powers up in whichever font you specify.
NOTE: When the printer is in the factory default setting
(either Epson or Proprinter emulation depending on the
model you ordered), it selects the Pica font (font number
382 or 385) regardless of the font specified as the power-
up font.
If
the printer is powered-up in Diablo or Qume
Emulation Mode and then switched to Epson or Proprinter
Emulation Mode, it will automatically select the Pica font
and ignore the power-up font.
See Part III Section E.6 (Group E Option A) or Part III
Section F 5 (Group I Option
5)
for printer set-up informa-
tion that allows a font already in use to override the Pica
font when either Epson or Proprinter Emulation Mode is
accessed.
To change the power-up landscape font see the following
section of the user's guide:
Changing Power-Up Landscape Font (Keypad)
Part HI Section G
Group L Options 1-5
Tutorial
2-27
Advertisement
Table of Contents
