Table of Contents
Advertisement
I
<ESC>*c4F
I
Font Temporary
I
<ESC>*c5F
I
Font Permanent
These commands define the font under the current ID as
temporary or permanent, respectively. Permanent fonts
are not deleted by resetting the printer.
I
<ESC>*c6FI
Copy/Assign Font
This command assigns the currently selected font to the
current font ID. Its primary purpose is to assign a font ID
number to a resident or cartridge font.
I
<ESC>nln2@
I
Font Defaults
This command establishes the characteristics of the current
primary font, as specified by parameter nl( (
=
primary; )
=
secondary). Parameter n2 acts according to the options
below.
A value of 0 or 1 sets the character set for the primary
font to the default character set (Roman-8).
A value of
2
sets the character set for the specified font to
that of the current primary font. (This forces the printer to
re-select the font closest to the current font specification.)
A value of 3 sets the selected font to the default font for the
current orientation, and invokes its default characteristics.
The above actions operate within the constraints of the
current orientation.
I
<ESC»nl@1
Secondary Font Defaults
This command establishes the characteristics of the current
secondary font. Parameter nlacts according to the options
below.
H-32
HP Emulation Mode
Advertisement
Table of Contents
