Table of Contents
Advertisement
A.4
How To Change a Printer Feature
To change the setting of a printer feature, carefully follow
this procedure:
1. Take the printer off-line.
2.
Press
GROUP
to select the desired Group.
3. After the desired Group is showing in the left half
of the display window, press
OPTION
to select the
desired Option.
4. Note the setting (on/off) of the Option as indicated
by the light in
TOGGLE.
(The light is on if the Option
is on.)
5. If you wish to change the setting of the displayed
Option, press
TOGGLE.
The light in the
TOGGLE
key will change immediately. Never press
TOGGLE
unless you are certain of the change it will cause.
6.
Continue using
GROUP, OPTION,
and
TOGGLE
to
change any printer features.
7.
After you have made all desired changes, press
GROUP
to display any Option O.
8. When a "0" is showing in the right half of the display
window, press
TOGGLE
to store all settings (includ-
ing those settings you just changed) into memory.
The printer will print out a status summary sheet.
9. Check the section of the status summary sheet la-
belled "Enabled Options" to make sure all your changes
were saved. Options that are not listed under "En-
abled Options" are disabled (off).
Printer Setup
3-9
Advertisement
Table of Contents
