Table of Contents
Advertisement
(page length) - (top margin) - (0.5" bottom margin)
The top margin command is ignored if the current verti-
cal motion index is zero or if the specified top margin is
beyond the current page length.
I
<ESC>&ln1F
I
Text Length
This command sets the text length in lines, measured from
the top margin, via parameter
nl'
For example:
Text Length
60 lines
55 lines
Escape Sequence
<ESC>&160F
<ESC>&155F
The command is ignored if the text length plus the top
margin exceeds the current page length.
If a text length of zero lines is specified, the text length
defaults to the value given by:
(page length) - (top margin) - (0.5" bottom margin)
Note that there is no command which explicitly sets the
bottom margin. Instead the bottom margin is the space
left on the page after subtracting the current top margin
and text length. That is:
(bottom margin)
=
(page length) - (top margin) - (text length)
I
<ESC>&lnlL
I
Perforation
Skip Mode
This command controls automatic skipping over the bot-
tom margin of each page. The feature is enabled by the
command
<ESC>&l1L
and disabled by
<ESC>&IOL.
If perforation skip is
ON,
the current page is printed when-
ever a vertical move command causes the current print po-
sition to enter the bottom margin area. This is the default
condition.
H-16
HP Emulation Mode
Advertisement
Table of Contents
