Table of Contents
Advertisement
J.3
Output
Tray
Offset
I
<ESC>&lnl T
1
Job Offset
This command is recognized by the printer, but has no
effect. It is included for software compatibility reasons.
K
Miscellaneous Features
K.1
Miscellaneous Commands
I
<ESC>&dnl
I
Automatic Underlining
This command enables or disables automatic underlining,
depending on the value of
nl:
Command
<ESC>&dD
<ESC>&d@
Action
Enable underlining
Disable underlining
Automatic underlining is continuous; that is both spaces
and printable characters are underlined. The underlining
produced this way is just below the main body of the
text, and the line passes through descenders in lowercase
characters like
g.
Internally, the printer remembers the left-
and right-most extent of each underline, and prints them
before executing the next vertical position command.
Alternative methods for underlining include:
1. Use of rule/pattern (or raster) graphics. This method
H-60
HP Emulation Mode
Advertisement
Table of Contents
