Table of Contents
Advertisement
1.1
The Default: Single Copies
The default copy count is one. If you want to print one
copy of any file, the printer is properly set.
1.2
Changing the Copy Count
Because of the number of possible settings, please see
the following section of Printer Setup for instructions for
changing the copy count:
Copy Count (Keypad)
Part III Section L
Group 2 Options 1-9
Part III Section M
Group 3 Options 1-9
You may also make this change through a software com-
mand. The instructions for using this method are located
in the following place in this user's guide:
Part IV Section E
Copy Count (Software)
1.3
Copy Count Reset
The Copy Count may be reset to one with the following
procedure:
Copy Count Reset (Keypad)
Part III Section J.l
Group 0 Option 1
Tutorial
2-29
Advertisement
Table of Contents
