Emulation - QMS 1725E Reference

Notes

Emulation

Sets the parallel interface emulation.
Menu
Choices
Default
Minimum Number of Kilobytes for Spooling
Sets the minimum number of kilobytes of system memory allocated to
the parallel interface.
Menu
Choices
Default
Notes
4-24
The printer must be restarted for changes to the menu to take
effect. You can either let the printer restart automatically after
you save the change and exit from the Configuration menu, or
you can wait for the change to take effect the next time you
manually turn on the printer. See chapter 5, "Additional
Technical Information," for a discussion of the different modes.
Administration/Communications/Parallel/Emulation
ESP, Hexdump, PostScript, PCL5, HPGL, CCITT, Lineprinter
Other optional emulations also appear, if installed.
ESP
Administration/Communications/Parallel/Min K Spool
00000-99999
00015
This value must be less than K Mem For Spool.
A 00000 value does not turn off the spooling buffer for the
parallel interface. If the value is set to 00000, the printer
calculates the Min K Spool automatically at initialization.
The printer must be restarted for changes to the Min K Spool
menu to take effect. You can either let the printer restart
automatically after you save the change and exit the
configuration menu, or you can wait for the change to take
effect the next time you manually turn on the printer.
QMS 1725E Print System Reference