QMS SmartWriter 80+ User Manual page 345

Table of Contents

Advertisement

• ALTERNATE VERTICAL MOTION INDEX pro-
vides an alternate method of establishing the line
spacing value.
• HORIZONTAL MOTION INDEX is used to estab-
lish the character spacing.
• ALTERNATE HORIZONTAL MOTION INDEX pro-
vides an alternate method of establishing the charac-
ter spacing value.
• SET HORIZONTAL TAB STOP
• TAB SET LIST allows you to set all horizontal tabs
with one command.
• CLEAR INDIVIDUAL TAB STOP clears the tab at
the current position.
• CLEAR ALL HORIZONTAL TAB STOPS
I
<ESC>+
I
SET TOP MARGIN
Use this <ESC>+ (plus sign) command to set the Top
Margin anywhere within the page length except below the
Bottom Margin or the bottom edge of the page. Use Line
Feed commands until the desired Top Margin is reached
and then issue the Top Margin command. For example,
the following sequence of commands would establish a
top margin four lines from the top of the page:
<LF><LF><LF><LF><ESC>+
The actual physical distance represented by a <LF>
command depends on the Vertical Motion Index or
the lines per inch selected in Group
Q
Option 3. Once
set, all subsequent pages will begin at this Top Margin
until the value is changed The default Top Margin is the
Top-of-Form.
The Top Margin may also be set by using the keypad to
configure Group 4 Options 9, A, B, and C.
Qume Emulation Mode
G-9

Advertisement

Table of Contents
loading

Table of Contents