Table of Contents
Advertisement
printer will also insert extra ones of its own. If this Option
is off, files which do not have carriage returns and line
feeds will overprint on one line.
No Auto
<CR><LF>t
Auto
<CR><LF>
GROUP
TOGGLE
I
Q
onl
1.5
Option 6 - Select Character Spacing
This Option lets you select either the Qume emulation
character spacing (specified by Group Q Options 1 and
2) or the character spacing "built into" whatever font you
are using.
If
no character spacing is specified through the
Qume HMI command and Option 6 is off, the printer will
use the character spacing set through Options 1 and 2. If
Option 6 is on, the printer will use the character spacing
of the font in use. (Refer to the status summary sheet for
the character spacing of the fonts.)
\
J
~rtem
Function Options (Group
This Group controls some of the basic operation capabil-
ities of the printer.
Toggle Option 0 of any Group to save changes to
Printer Setup.
t=
Factory setting
3-32
Printer Setup
Advertisement
Table of Contents
