Table of Contents
Advertisement
the default Epson Pica font that would normally be
activated as soon as Epson emulation mode is en-
tered.
• The
n2
parameter does not change the page orienta-
tion. The
n2
parameter lets the printer know which
orientation you are choosing. Omitting the
n2
pa-
rameter would automatically specify the current ori-
entation.
• If you use this command to change to a font that has a
different orientation from the one in which the printer
is operating (e.g., landscape when the printer is oper-
ating in portrait), the printer does not change fonts. It
saves that font number request and, when you switch
the printer to the other page orientation, then selects
the font. (Note: If the font number you select does
not exist in the orientation that you specified, the
command is ignored and the power-up default font
is selected.)
• Invalid values in any of the command parameters will
cause the command to be ignored. The range of valid
values for
nl
is 0 to 37627.
B.3
Examples
LPRINT CHR$ (27) ; " [380; 0; Is"
Selects font 380 in por-
trait orientation.
LPRINT CHR$ (27) ;" [382; 0; Is"
Selects font 382 in por-
trait orientation.
LPRINT CHR$(27) ;"[7504;1;ls"
Selects font 7504 in
landscape orientation.
4-4
Software Commands
(
\
Advertisement
Table of Contents
