Table of Contents
Advertisement
Labels
This printer prints well on labels if you carefully follow these guidelines:
• Be careful to use labels under normal operating conditions. Labels are
• Use the rear stacker (or that of the duplex unit when your printer has
• Use only labels without backing sheets exposed in the printable area.
• Test-print labels before using them. If jamming problems occur and
Changing the Paper Tray Size
The paper tray can be adjusted to one of the three paper sizes: A4,
A5, LTR (Letter), and EXE (Executive). To change the size, follow
these steps:
Left guide
QMS DeskLaser 1600 User Manual
sensitive to temperature and humidity.
the duplex unit) so that labels are ejected straight out the back to
minimize curl.
Labels mounted separately on a backing sheet tend to slip, resulting in
crocked print.
Backing
sheet is
exposed.
Not acceptable
continue, try a different type of label.
Rear guide
Paper size
Label
indicator
Backing sheet
is not
exposed.
Acceptable
1. Remove the paper tray
from the printer.
Refer to the illustration for
the parts you adjust when
changing the size of the
Right guide
tray.
2-22
Advertisement
Table of Contents
