Changing Character Information - QMS 1725E Reference

Select Access the Emulation menu.
Previous Advance to the Emulation/PostScript
menu.
Select Select PostScript as the default
emulation.
After 3 seconds you are returned to the
Parallel/Emulation menu.
Online/ Exit from the menu (Online/Offline) or
Offline or return to the previous menu (Menu). You
Menu are prompted to save your change(s).
Next Advance to the Save Changes?/Yes
option.
Select Select Yes. The printer finishes printing
any print jobs in process, saves your
change, and returns to idle.

Changing Character Information

Sometimes, rather than selecting an option, you need to enter char-
acter information. A character is any letter, digit, or symbol. A field is a
group of characters that have meaning. Use the printer control panel
to enter character information in the message window during printer
configuration. The maximum length of the message window is 16
characters.
Entering character information through the control panel is similar to
setting the time and date on a digital watch. You enter one character
at a time. The current input character flashes. Use the following keys
to change the current input character:
Press this key
Next
Previous
Printer Configuration
to...
Advance to the next choice for the current input character.
Return to the previous choice for the current input
character.
Configuration Menu
EMULATION
ESP
EMULATION
POSTSCRIPT
POSTSCRIPT
IS SELECTED
PARALLEL
EMULATION
SAVE CHANGES?
NO
SAVE CHANGES?
YES
IDLE
4-7