Table of Contents
Advertisement
iPDU for director attachment:
Figure 96. iPDU (PN 00FW787) for director attachment
SAN rack specifications
The physical dimension specifications for the SAN rack are listed in Table 34. An example weight with
two M12 directors installed is also included. (The M12 is heavier than either the M14 or M48, fully
populated.) The total weight of a rack with directors installed will depend upon which directors are
installed. For the specifications of individual directors, see the respective installation and service guides.
Table 34. IBM SAN rack specifications
Dimension
Height
Depth
Width
EIA units
Weight
Note: The maximum supported configuration for a SAN rack is two directors.
Value
1785 mm (70.3 in.)
v With rear door installed: 1042 mm (41 in.)
v With rear and front door installed: 1098 mm (43.3 in.)
v With side panels installed: 650 mm (25.6 in.)
v Without side panel installed: 623 mm (24.5 in.)
36 EIA units
rack 535 lbs
rack with two 8961 Model F08 directors: 535 lbs + 2 x 321.5
229
Appendix A. SAN rack
Advertisement
Table of Contents
