EX9214 Switch Hardware Guide
Related
Documentation
Removing the Cable Management Bracket from an EX9214 Switch
248
Figure 88: Installing the Cable Management Bracket in an EX9214 Switch
Removing the Cable Management Bracket from an EX9214 Switch on page 248
Cable Management Bracket in an EX9214 Switch on page 41
The cable management bracket is installed below the line card and SF module slots on
the front panel.
Before you remove a cable management bracket from the switch:
Ensure you understand how to prevent Electrostatic discharge (ESD) damage. See
"Prevention of Electrostatic Discharge Damage" on page
Ensure that you have the following parts and tools available:
ESD grounding strap
7/16 in. (11 mm) nut driver
329.
Copyright © 2017, Juniper Networks, Inc.