Line Card Components; Ex9200-40T Line Card; Figure 32: Ex9200-32Xs Line Card - Juniper EX9214 Hardware Manual

Line Card Components

Related
Documentation

EX9200-40T Line Card

Copyright © 2017, Juniper Networks, Inc.

Figure 32: EX9200-32XS Line Card

1— Ejector lever
2— Line card LED
You can use the show version
switches loaded on the switch.
The line card has:
32 10-Gigabit Ethernet ports, each of which can house SFP+ transceivers
32 dust covers for the ports (shipped in an accessory bag)
Line card LED—An LED labeled
See "Line Card LED in an EX9200 Switch" on page
LEDs for the ports—One LED on each port, the Link/Activity LED, which indicates the
link status and activity on the port. See
Switch" on page 37.
The ports are divided into two port groups of 16 ports each—the ports labeled
and through form one port group; the ports labeled
0/7 1/0 1/7
through form the other port group. The ports in each group share 130 gigabits of
3/7
bandwidth. Thus, you can transmit up to 130 gigabits of traffic through a port group,
without packet drop.
Line Card Model and Version Compatibility in an EX9200 Switch on page 55
Pluggable Transceivers Supported on EX9200 Switches on page 105
Installing a Line Card in an EX9200 Switch on page 220
Handling and Storing Line Cards in EX9200 Switches on page 215
The line cards in EX9200 switches provide packet forwarding services. They are
field-replaceable units (FRUs) that you can install in the line card slots on the front of
the switch chassis. Line cards are hot-insertable and hot-removable: You can remove
and replace them without powering off the switch or disrupting switch functions.
3— LEDs for the ports
4— 10-Gigabit Ethernet ports
command to see the version of Junos OS for EX Series
, which indicates the status of the line card.
OK/FAIL
75.
"Network Port LEDs on Line Cards in an EX9200
Chapter 5: Line Cards
through
0/0
through and
2/0 2/7 3/0
69