Line Card Models; Line Card Components; Figure 33: Ex9200-40T Line Card; Table 31: Ex9200-40T Line Card - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide

Line Card Models

Line Card Components

70
This topic describes:
Line Card Models on page 70
Line Card Components on page 70
Table 31 on page 70 shows the model number, description of the line card model, and
the Junos OS release in which the line card was first supported.

Table 31: EX9200-40T Line Card

Model Description
EX9200-40T A line card with 40 RJ-45 ports that
support RJ-45 connectors
See Figure 33 on page 70.

Figure 33: EX9200-40T Line Card

1— Ejector lever
2— Line card LED
3—MIC LED
You can use the show version
switches loaded on the switch.
The EX9200-40T line card has:
40 RJ-45 ports that support RJ-45 connectors
Line card LED—An LED labeled
See "Line Card LED in an EX9200 Switch" on page
MIC LED—An LED labeled
See "Modular Interface Card LED in an EX9200 Switch" on page
LEDs for the ports—One LED on each port, the Link/Activity LED, which indicates the
link status and activity on the port and another LED, the Status LED, which indicates
the status of the port parameters. See
Switch" on page 37.
4— LEDs for the ports
5— RJ-45 ports
command to see the version of Junos OS for EX Series
, which indicates the status of the line card.
OK/FAIL
75.
OK/FAIL on each MIC, which indicates the status of the MIC.
"Network Port LEDs on Line Cards in an EX9200
Junos OS Release Required
12.3R2 or later
38.
Copyright © 2017, Juniper Networks, Inc.