Figure 22: Ac Power Supply In An Ex9214 Switch - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
46
WARNING: The switch is installed in a restricted-access location. It has a
separate protective earthing terminal (sized for UNC 1/4-20 ground lugs)
provided on the chassis in addition to the grounding pin of the power supply
cord. This separate protective earthing terminal must be permanently
connected to earth.
CAUTION: Before switch installation begins, ensure that a licensed electrician
has attached an appropriate grounding lug to the grounding cable that you
supply. Using a grounding cable with an incorrectly attached lug can damage
the switch.
Each AC power supply weighs approximately 11.9 lb (5.4 kg). The power supplies consist
of an AC input switch and LEDs that indicate the status of the power supply. See
Figure 22 on page 46.

Figure 22: AC Power Supply in an EX9214 Switch

1
0
EX9214 switches support 4100 W AC power supply. The AC power supply supports
200–240 VAC AC power configurations.
Copyright © 2017, Juniper Networks, Inc.