Line Card Components; Figure 35: Ex9200-40F-M Line Card; Table 33: Ex9200-40F-M Line Card - Juniper EX9214 Hardware Manual

Line Card Components

Copyright © 2017, Juniper Networks, Inc.

Table 33: EX9200-40F-M Line Card

Model Description
EX9200-40F-M A line card with 40 1-Gigabit Ethernet ports with Media
Access Control Security (MACsec) capability, each of which
can house 1-gigabit small form-factor pluggable (SFP)
transceivers. The EX9200-40F-M line card supports
802.1AE IEEE MAC Security standard (also known as
MACsec) with AES-128 bit encryption, providing support
for link-layer data confidentiality, data integrity, and data
origin authentication. You must apply a single
license—EX9200-SFL—to enable MACsec.
See Figure 35 on page 73.

Figure 35: EX9200-40F-M Line Card

1— Ejector lever
2— Line card LED
3—MIC LED
You can use the
show version
switches loaded on the switch.
The EX9200-40F-M line card has:
40 1-Gigabit Ethernet MACsec-capable ports, each of which can house SFP transceivers.
These ports support 1000BASE-T, 10/100/1000BASE-T, 100BASE-FX, 1000BASE-EX,
1000BASE-LH, 1000BASE-LX, and 1000BASE-SX transceivers.
Line card LED—An LED labeled
See "Line Card LED in an EX9200 Switch" on page
MIC LED—An LED labeled
See "Modular Interface Card LED in an EX9200 Switch" on page
LEDs for the ports—One LED on each port, the Link/Activity LED, which indicates the
link status and activity on the port. See
Switch" on page 37.
4— LEDs for the ports
5— 1-Gigabit Ethernet ports with MACsec
capability
command to see the version of Junos OS for EX Series
, which indicates the status of the line card.
OK/FAIL
75.
on each MIC, which indicates the status of the MIC.
OK/FAIL
"Network Port LEDs on Line Cards in an EX9200
Chapter 5: Line Cards
Junos OS
Release
Required
14.2R1 or later
38.
73