Figure 29: Ex9200-20F-Mic; Figure 30: Ex9200-40T-Mic - Juniper EX9214 Hardware Manual

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.

Figure 29: EX9200-20F-MIC

1— LEDs for the ports
2— 1-Gigabit Ethernet ports
EX9200-40T-MIC, which has 40 RJ-45 ports, which can accept RJ-45 connectors.
The ports are divided into three port groups. The ports labeled
through form port group
0/0 1/4
through form port group
2/2
through form port group
3/8
status of the MIC. See
See Figure 30 on page

Figure 30: EX9200-40T-MIC

1— Link/Activity LED for the ports
2— Status LED the ports
3—RJ-45 ports
Cover panels—Two cover panels that cover the MIC slots.
Line card LED—An LED labeled
See "Line Card LED in an EX9200 Switch" on page
Network port LEDs—Each port on the EX9200-10XS-MIC and each port on the
EX9200-20F-MIC has an LED, the Link/Activity LED, which indicates the link status
and activity on the port. Each port on the EX9200-40T-MIC has another LED, the Status
LED, which indicates the status of the port parameters. See
Line Cards in an EX9200 Switch" on page
Line Card Model and Version Compatibility in an EX9200 Switch on page 55
Pluggable Transceivers Supported on EX9200 Switches on page 105
3— MIC LED
4— MIC power button
, the ports labeled
pic0
, and the ports labeled
pic1
. An LED labeled
pic2
"Modular Interface Card LED in an EX9200 Switch" on page
65.
4— MIC power button
5— MIC LED
, which indicates the status of the line card.
OK/FAIL
37.
Chapter 5: Line Cards
0/1 through
through and
1/7 2/3
through and
2/5 3/9
on the MIC indicates the
OK/FAIL
75.
"Network Port LEDs on
1/5 and
1/6
2/4
38.
65