Front Panel Components; Rear Panel Components; Mx10003 Cable Management Bracket Description - Juniper MX10003 Hardware Manual

Front Panel Components

Table 8 on page 28 lists the components on the front panel of the MX10003 router.
Table 8: Front Panel Components in a Fully Configured MX10003 Router
Component
RCB
MPC
MIC (installed in MPC)
Cable management brackets
Air filter unit

Rear Panel Components

Table 9 on page 28 lists the components on the rear panel of the MX10003 router.
Table 9: Rear Panel Components in a Fully Configured MX10003 Router
Component
Power supply module
Fan module

MX10003 Cable Management Bracket Description

The cable management bracket (see
the chassis. The cable management bracket enables you to route the cables outside the router and away
from the RCBs, MICs, and MPCs.
Slots
0 and 1
0 and 1
1 per MPC
NOTE: MIC installs in slot 1 of the MPC.
-
-
Slots
0 through 5
0 through 3
Figure 5 on page 29) consists of dividers and installs on the front of
Number of FRUs
2
2
1
2
1
Number of FRUs
6
4
28