Modular Interface Card Led In An Ex9200 Switch; Led; Table 17: Network Port Leds On Line Cards In An Ex9200 Switch-Status - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Related
Documentation

Modular Interface Card LED in an EX9200 Switch

38
Table 17: Network Port LEDs on Line Cards in an EX9200 Switch—Status

LED

LED LCD Indicator
Status LED: ADM
LED: SPD
LED: DPX
Line Card LED in an EX9200 Switch on page 75
Craft Interface in an EX9200 Switch on page 22
The Modular Interface Cards (MICs) in the following line cards for EX9200 switches have
an LED labeled on the faceplate that indicates the online status information of
OK/FAIL
MICs.
EX9200-4QS Line Card on page 59
EX9200-MPC Line Card on page 62
EX9200-40F Line Card on page 71
EX9200-40F-M Line Card on page 72
EX9200-40T Line Card on page 69
Table 18 on page 39 describes the MIC LED on line cards for EX9200 switches, its colors
and state, and the status it indicates.
State, Color, and Description
Indicates the administrative status (enabled or
disabled). The status indicators are:
Green—Administrative status enabled.
Yellow—The port is down.
Unlit—Administrative status disabled.
Indicates the speed. The speed indicators are
different in the line cards.
Unlit—10 Mbps
Green—Blinking—100 Mbps
Green—On steadily—1000 Mbps
Indicates the duplex mode. The status
indicators are:
Green—Port is set to full-duplex mode.
Unlit—Port is not set to full-duplex mode.
Copyright © 2017, Juniper Networks, Inc.