Management Cable Specifications; Table 54: Specifications Of Cables To Connect To Management Devices - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Table 53: QSFP+ Direct Attach Copper Cable Specifications (continued)
Model Number Specification
JNP-QSFP-DAC-5M Rate
Connector type
Supply voltage
Power consumption (per end)
Storage temperature
Cable type
Wire AWG
Minimum cable bend radius
Cable characteristic impedance
Crosstalk between pairs
Time delay
Length
Support for Virtual Chassis
configuration
Related
Documentation

Management Cable Specifications

Table 54: Specifications of Cables to Connect to Management Devices

Ports
RJ-45 Console ( CON2 ) port
Management ( )
MGMT
Ethernet port (10/100/1000)
122
Installing a Transceiver on page 235
Removing a Transceiver on page 237
Table 54 on page 122 lists the specifications for the cables that connect the console (
and management (
MGMT
Cable Specifications
CAT5e UTP (unshielded
twisted pair) cable
–
Value
40-Gbps full-duplex serial transmission
QSFP+ passive Twinax cable assembly
3.3 V
0.015 W
–40° C through 85° C
Twinax
26 AWG
2.54 cm (1 in.)
100 ohms
1% maximum
4.3 nsec/ft
16.4 ft (5 m)
Yes
) ports to management devices.
Receptacle
RJ-45
–
Additional Information
Connecting a Device to a
Management Console by Using
an RJ-45 Connector
Connecting a Device to a
Network for Out-of-Band
Management
Copyright © 2017, Juniper Networks, Inc.
CON )