Ac Power Cord Specifications For An Ex9214 Switch; Table 44: Ac Power System Specifications; Table 45: Ac Power Cord Specifications For An Ex9214 Switch - Juniper EX9214 Hardware Manual

Related
Documentation

AC Power Cord Specifications for an EX9214 Switch

Copyright © 2017, Juniper Networks, Inc.
Table 44 on page 97 lists the AC power system specification for an EX9214 switch.

Table 44: AC Power System Specifications

Item
Redundancy
Output power (maximum)
per power supply
Output power (maximum)
per system
AC Power Supply in an EX9214 Switch on page 45
AC Power Supply LEDs in an EX9214 Switch on page 47
AC Power Cord Specifications for an EX9214 Switch on page 97
Each AC power supply has a single AC appliance inlet located on the power supply that
requires a dedicated AC power feed. Most sites distribute power through a main conduit
that leads to frame-mounted power distribution panels, one of which can be located at
the top of the rack that houses the switch. An AC power cord connects each power supply
to the power distribution panel.
You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that
supply AC power to the switch. The C19 appliance coupler at the female end of the cord
inserts into the AC appliance inlet coupler, type C20 (right angle) as described by
International Electrotechnical Commission (IEC) standard 60320. The plug at the male
end of the power cord fits into the power source receptacle that is standard for your
geographical location.
Table 45 on page 97 provides specifications and
on the AC power cord provided for each country or region.

Table 45: AC Power Cord Specifications for an EX9214 Switch

Country
Australia
China
Europe (except Denmark, Italy,
Switzerland, and United Kingdom)
Italy
Base Configuration
3+1
4100 W in two-feed mode and
1700 W in one-feed mode
12300 W in two-feed mode and
5100 W in one-feed mode
Figure 40 on page 98
Electrical Specification
240 VAC, 50 Hz AC
220 VAC, 50 Hz AC
220 or 230 VAC, 50 Hz AC
230 VAC, 50 Hz AC
Chapter 7: Planning Power Requirements
Redundant Configuration
2+2
4100 W in two-feed mode and
1700 W in one-feed mode
8200 W in two-feed mode and
3400 W in one-feed mode
depicts the plug
Plug Type
SAA/3
PSB-10
CEE 7/7
CEI 23-16/VII
97