Registering Products-Mandatory For Validating Slas - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Related
Documentation
Registering Products—Mandatory for Validating SLAs
Related
Documentation
136
Table 59: Accessory Box Parts List (continued)
Part
9 in. x 12 in. pink bag, Electrostatic discharge (ESD)
Accessory Box, 19 in. x 12 in. x 3 in.
Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP,
Category 5E, 15'
ESD wrist strap with cable
Unpacking the EX9200 Switch on page 131
EX9214 Switch Hardware Overview on page 3
Register all new Juniper Networks hardware products and changes to an existing installed
product using the Juniper Networks website to activate your hardware replacement
service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website
and update the installation base data if there is any addition or change to
the installation base or if the installation base is moved. Juniper Networks
will not be held accountable for not meeting the hardware replacement
service-level agreement for products that do not have registered serial
numbers or accurate installation base data.
Register your product(s) at:
Update your install base at:
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
Contacting Customer Support to Obtain Return Material Authorization on page 270
Contacting Customer Support to Obtain a Return Materials Authorization for an NFX250
Device
Quantity
2
1
1
1
https://tools.juniper.net/svcreg/SRegSerialNum.jsp
Copyright © 2017, Juniper Networks, Inc.
.
.