Juniper EX9214 Hardware Manual page 169

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
All the line cards are hot-removable and hot-insertable. However, we recommend that
you take them offline before removing them.
The AC and DC power supplies, fan tray, and the SFP, SFP+, and QSFP+ transceivers in
EX9200 switches are hot-removable and hot-insertable FRUs: You can remove and
replace them without powering off the switch or disrupting switch functions.
To install an RE module in an EX9200 switch, follow instructions in
Module in an EX9200 Switch" on page
switch, follow instructions in
page 201.
To install an SF module in an EX9200 switch, follow instructions in
Module in an EX9200 Switch" on page
switch, follow instructions in
page 212.
To install a line card in an EX9200 switch, follow instructions in
an EX9200 Switch" on page
instructions in "Removing a Line Card from an EX9200 Switch" on page
To install an AC power supply in an EX9214 switch, follow instructions in
AC Power Supply in an EX9214 Switch" on page
EX9214 switch, follow instructions in
Switch" on page 191.
To install a DC power supply in an EX9214 switch, follow instructions in
Power Supply in an EX9214 Switch" on page
EX9214 switch, follow instructions in
Switch" on page 196.
To install a fan tray in an EX9200 switch, follow instructions in
an EX9200 Switch" on page
instructions in "Removing a Fan Tray from an EX9200 Switch" on page
To install a transceiver in an EX9200 switch, follow instructions in
on page 235. To remove a transceiver from an EX9200 switch, follow instructions in
"Removing a Transceiver" on page
Field-Replaceable Units in an EX9200 Switch on page 19
EX9214 Switch Hardware Overview on page 3
199. To remove an RE module from an EX9200
"Removing an RE Module from an EX9200 Switch" on
209. To remove an SF module from an EX9200
"Removing an SF Module from an EX9200 Switch" on
220. To remove a line card in an EX9200 switch, follow
189. To remove a power supply from an
"Removing an AC Power Supply from an EX9214
193. To remove a DC power supply from an
"Removing a DC Power Supply from an EX9214
183. To remove a fan tray from an EX9200 switch, follow
237.
Chapter 11: Installing the Switch
"Installing an RE
"Installing an SF
"Installing a Line Card in
222.
"Installing an
"Installing a DC
"Installing a Fan Tray in
186.
"Installing a Transceiver"
145