Cable Specifications
Table 50: Software Support for SFP+ Passive Direct Attach Copper Cables for EX Series Switches
Switch
Software Support Added
EX2300 switches
Junos OS Release 15.1X53-D50
EX3200 switches
Junos OS Release 10.3
EX3300 switches
Junos OS Release 11.3
EX3400 switches
Junos OS Release 15.1X53-D50
EX4200-24T,
Junos OS Release 10.3
EX4200-24T-DC,
EX4200-24P,
EX4200-24PX,
EX4200-24F,
EX4200-24F-DC,
EX4200-48T,
EX4200-48T-DC,
EX4200-48P, and
EX4200-48PX switches
EX4200-24F-S and
Junos OS Release 12.3R4
EX4200-48T-S
switches
Copyright © 2017, Juniper Networks, Inc.
Figure 42: SFP+ Direct Attach Copper Cables for EX Series Switches
This topic describes:
Cable Specifications on page 111
Standards Supported by These Cables on page 116
EX Series switches support SFP+ passive DAC cables. The passive Twinax cable is a
straight cable with no active electronic components. EX Series switches support 1 m,
3 m, 5 m, and 7 m long SFP+ passive DAC cables. For the full specifications of these
cables, see
The Hardware Compatibility Tool
Table 50 on page 111
describes the support for SFP+ passive DAC cable lengths on
EX Series switches for Junos OS releases.
Chapter 8: Transceiver and Cable Specifications
.
Cable Length
3 ft (1 m), 10 ft (3 m), and 16 ft (5 m)
3 ft (1 m), 10 ft (3 m), 16 ft (5 m), and 23 ft (7 m)
3 ft (1 m), 10 ft (3 m), 16 ft (5 m), and 23 ft (7 m)
3 ft (1 m), 10 ft (3 m), 16 ft (5 m), and 23 ft (7 m)
3 ft (1 m), 10 ft (3 m), 16 ft (5 m), and 23 ft (7 m)
3 ft (1 m), 10 ft (3 m), 16 ft (5 m), and 23 ft (7 m)
111