Figure 16: Sf Module Ex9200-Sf - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
34
Clocking, system resets, and booting control
Routing Engine carrier
Figure 16 on page 34 shows the original SF module, EX9200-SF.

Figure 16: SF Module EX9200-SF

Starting with Junos OS Release 14.1, a high-speed SF module, EX9200-SF2, is available.
Compared to the original SF module, EX9200-SF, the EX9200-SF2 offers increased
bandwidth, providing higher-capacity traffic support in settings that require greater
interface density (slot and capacity scale).
The EX9200-SF2 supports all EX9200 line cards.
NOTE: When you upgrade from an EX9200-SF module to an EX9200-SF2
module in an EX9200 switch, the SF module types can coexist in the switch
during the upgrade. However, you must replace that EX9200-SF module with
another EX9200-SF2 module for normal switch operation. See
an EX9200-SF to an EX9200-SF2" on page
Figure 17 on page 35 shows the high-speed SF module, EX9200-SF2.
"Upgrading
205.
Copyright © 2017, Juniper Networks, Inc.