Line Card Components; Line Card Led In An Ex9200 Switch; Figure 36: Ex9200-40Xs Line Card - Juniper EX9214 Hardware Manual

Line Card Components

Related
Documentation

Line Card LED in an EX9200 Switch

Copyright © 2017, Juniper Networks, Inc.

Figure 36: EX9200-40XS Line Card

1— Ejector lever
2— Line card LEDs
You can use the
show version
switches loaded on the switch.
The EX9200-40XS line card has:
40 10-Gigabit Ethernet MACsec-capable ports, each of which can house SFP+
transceivers. These ports support 10GBASE-SR, 10GBASE-LRM, and 10GBASE-LR
transceivers.
40 dust covers for the ports.
Line card LED—An LED labeled
See "Line Card LED in an EX9200 Switch" on page
Network port LED—One LED on each network port, the Link/Activity LED, which indicates
the link status and activity on the port. See
EX9200 Switch" on page
The ports are divided into two port groups of 20 ports each. The 10-Gigabit Ethernet
ports labeled through
0/0 0/19
through form the other port group. The ports in each group share 200 gigabits
1/0 1/19
of bandwidth. Thus, you can transmit up to 200 gigabits of traffic through each port
group, without packet drop.
Line Card Model and Version Compatibility in an EX9200 Switch on page 55
Pluggable Transceivers Supported on EX9200 Switches on page 105
Installing a Line Card in an EX9200 Switch on page 220
Handling and Storing Line Cards in EX9200 Switches on page 215
The line cards in EX9200 switches have an LED labeled
indicates the online status information of line cards.
3— LEDs for the 10-Gigabit Ethernet ports
4— 10-Gigabit Ethernet ports with MACsec
capability
command to see the version of Junos OS for EX Series
, which indicates the status of the line card.
OK/FAIL
75.
"Network Port LEDs on Line Cards in an
37.
form one port group. The 10-Gigabit Ethernet ports labeled
Chapter 5: Line Cards
on the faceplate that
OK/FAIL
75