Ex9214 Switch Hardware And Cli Terminology Mapping; Table 6: Cli Equivalents Of Terms Used In Documentation For Ex9214 - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Related
Documentation

EX9214 Switch Hardware and CLI Terminology Mapping

Table 6: CLI Equivalents of Terms Used in Documentation for EX9214 Switches
Hardware
Item (CLI) Description (CLI)
Chassis EX9214
Midplane One of the following:
EX9214-BP
EX9214-BP3
FPM Board Front Panel Display
PEM (n) One of the following:
PS 4.1 kW;
200-240 V AC in
DC 2.4 kW Power
Entry Module
10
CAUTION: Do not install AC and DC power supplies in the same switch.
Chassis Physical Specifications of an EX9214 Switch on page 15
Routing Engine Module in an EX9200 Switch on page 29
Switch Fabric Module in an EX9200 Switch on page 33
AC Power Supply in an EX9214 Switch on page 45
Cooling System and Airflow in an EX9214 Switch on page 43
EX9214 Switch Hardware Overview on page 3
This topic describes the hardware terms used in EX9214 switch documentation and the
corresponding terms used in the Junos OS CLI. See
Value (CLI)
–
–
–
n is a value in the range 0-3.
The value corresponds to
the power supply slot
number.
Table 6 on page
Item in
Documentation Additional Information
Switch chassis "Chassis Physical
Specifications of an
EX9214 Switch" on
page 15
Switch midplane "Midplane in an EX9200
Switch" on page 27
Craft interface "Craft Interface in an
EX9200 Switch" on
page 22
AC or DC power supply AC Power Supply in
an EX9214 Switch on
page 45
DC Power Supply in
an EX9214 Switch on
page 49
Copyright © 2017, Juniper Networks, Inc.
10.