Config Flush - THOMSON SpeedTouch 608 Cli Reference Manual

config flush

Flush complete current configuration without affecting saved configurations.
This flush command combines all flush commands: bridge flush, cip flush, dhcp client flush, dhcp relay flush, dhcp server
flush, dhcp server lease flush, dhcp server pool flush, dns flush, env flush, ethoa flush, firewall flush, firewall chain flush,
firewall rule flush, ip flush, ip auto flush, ipoa flush, ipsec flush, ipsec policy flush, ipsec policy chain flush, ipsec policy rule
flush, label flush, label chain flush, label rule flush, nat flush, phonebook flush, pppoa flush, pppoe flush, pptp flush,
qosbook flush, script flush, snmp flush, sntp flush, switch group flush, system flush, systemlog flush and upnp flush.
SYNTAX:
config flush
where:
flush_ip
EXAMPLE:
=>ip rtlist
Destination
10.0.0.0/24
172.16.0.5/32
10.0.0.140/32
127.0.0.1/32
10.0.0.0/24
172.16.0.0/24
=>config flush flush_ip=no
=>ip rtlist
Destination
10.0.0.0/24
10.0.0.140/32
127.0.0.1/32
10.0.0.0/24
=>config flush flush_ip=yes
######### ALL TCP/IP CONNECTIVITY IS LOST ##########
RELATED COMMANDS:
config erase
config load
config save
E-DOC-CTC-20040216-0002 v1.0
[flush_ip = <{no|yes}>]
Flush IP settings (yes) or not (no).
The default is no.
Not keeping the IP settings could cause lost IP connectivity in
Note
the LAN.
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 172.16.0.5
0.0.0.0/0 10.0.0.140
0.0.0.0/0 127.0.0.1
0.0.0.0/0 10.0.0.140
0.0.0.0/0 172.16.0.5
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 10.0.0.140
0.0.0.0/0 127.0.0.1
0.0.0.0/0 10.0.0.140
Erase a user configuration file.
Load complete saved or default configuration.
Save current runtime configuration.
Intf Mtrc
eth0 0
cip1 0
eth0 0
loop 0
eth0 0
cip1 1
Intf Mtrc
eth0 0
eth0 0
loop 0
eth0 0
Config Commands
OPTIONAL
77