Ipsec Descriptor Delete - THOMSON SpeedTouch 608 Cli Reference Manual

ipsec descriptor delete

Delete an IKE (Phase 1) and AH/ESP (Phase 2) security descriptor.
SYNTAX:
ipsec descriptor delete
where:
name
phase
RELATED COMMANDS:
ipsec descriptor add
ipsec descriptor list
E-DOC-CTC-20040216-0002 v1.0
name = <string>
phase = <{IKE|IPSEC|1|2|I|II}>
The name of the security descriptor to delete.
Use the command ipsec descriptor list for a listing of avail-
Note
able security descriptors.
Specifies whether an IKE (Phase 1) or AH/ESP (Phase 2) security
descriptor is deleted.
Specify:
•
IKE or 1 or I
For specifying an IKE (Phase 1) security descriptor.
•
IPSEC or 2 of II
For specifying an AH/ESP (Phase 2) security descriptor.
Add a security descriptor.
Show a list of available security descriptors.
IPSec Commands
REQUIRED
REQUIRED
279