IP Commands
ip apadd
Assign an Internet Protocol (IP) address to an IP interface.
SYNTAX:
ip apadd
where:
addr
netmask
intf
pointopoint
addrtrans
addroute
192
addr = <ip-address>
[netmask = <ip-mask (dotted or cidr)>]
intf = <interface name>
[pointopoint = <ip-address>]
[addrtrans = <{none|pat}>]
[addroute = <{no|yes}>]
The new IP address to be added.
The subnetmask associated with this address.
The IP interface name.
The remote IP address in case of a dedicated point-to-point link.
Indicates whether network address translation mode is allowed
(pat) for this IP address or not (none).
Add typical net/subnet routes automatically according to the default
(or specified) subnet mask (yes) or not (no).
REQUIRED
OPTIONAL
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0