Ip Rtdelete - THOMSON SpeedTouch 608 Cli Reference Manual

IP Commands

ip rtdelete

Delete a route from the routing table.
SYNTAX:
ip rtdelete
where:
dst
dstmsk
label
gateway
intf
EXAMPLE:
=>ip rtlist
Destination Label
10.0.0.0/24
10.10.0.0/24
10.0.0.140/32
127.0.0.1/32
=>ip rtdelete dst=10.10.0.0/24 src=10.0.0.0/24 gateway=10.0.0.140
=>ip rtlist
Destination Label
10.0.0.0/24
10.0.0.140/32
127.0.0.1/32
=>
RELATED COMMANDS:
ip rtadd
ip rtlist
212
dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[label = <string>]
[gateway = <ip-address>]
[intf = <interface name>]
The destination IP address(es) for this route.
Supports cidr notation.
The destination IP address mask.
The name of the label.
The IP address of the next hop. Must be directly connected.
The parameters gateway and intf are mutually exclusive.
Note
Only for special interface routes: the outgoing IP interface name.
The parameters gateway and intf are mutually exclusive.
Note
Gateway
10.0.0.140
10.0.0.140
10.0.0.140
127.0.0.1
Gateway
10.0.0.140
10.0.0.140
127.0.0.1
Add a route to the routing table.
Show current routing table.
Intf Mtrc Status
eth0 0 [UP]
eth0 0 [UP]
eth0 0 [UP]
loop 0 [UP]
Intf Mtrc Status
eth0 0 [UP]
eth0 0 [UP]
loop 0 [UP]
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0