THOMSON SpeedTouch 608 Cli Reference Manual page 336

NAT Commands
foreign_port
RELATED COMMANDS:
nat delete
nat disable
nat enable
nat list
334
The port of the routable host.
Select one of the supported TCP/UDP port names (See
" Supported TCP/UDP Port Names" on page 480
TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number. Do not use 0 in case a
foreign IP address is specified.
Applicable for TCP and UDP protocols only. Other protocols do
not need a port to be specified.
Delete a static NAT/PAT entry.
Disable NAT/PAT on a SpeedTouch™ IP address.
Enable NAT/PAT on one of the SpeedTouch™ IP addresses.
List NAT/PAT connection database.
OPTIONAL
for a listing of
E-DOC-CTC-20040216-0002 v1.0