Ipsec Cert Clearall - THOMSON SpeedTouch 608 Cli Reference Manual

ipsec cert clearall

Physically delete the secure storage of certificates currently installed on the SpeedTouch™.
Use this command with extreme caution. Recovery of deleted certificates is NOT possible!
Note
SYNTAX:
ipsec cert clearall
where:
force
EXAMPLE:
=>ipsec cert clearall
Removing the secure storage will effectively delete
all certificates currently installed on this gate.
_no_ way to recover these certificates afterwards.
really sure you want to do this, use the force option
=>
=>ipsec cert clearall force=yes
Secure storage security is guaranteed when executing following commands:
Delete the passive software (software deletepassive)
Duplicate the active software as the passive software (software duplicate)
Switch over active and passive software (software switch)
=>
IMPORTANT NOTE:
To be absolutely sure that the secure storage is completely deleted from the SpeedTouch™'s file system, perform the
following actions:
Delete the passive SpeedTouch™ software:
1
=>software deletepassive
=>
Duplicate the current running active software as passive software version:
2
=>software duplicate
=>
Switch over active and passive software version:
3
=>software switch
=>
The SpeedTouch™ will restart. All certificates previously stored in the SpeedTouch™ file system subdirectories
/active and /dl are deleted. The secure storage is cleared.
E-DOC-CTC-20040216-0002 v1.0
[force = <{yes|no}>]
If you are really sure to clear the secure storage, specify yes.
If not specified, the secure storage is not deleted. A
Note
warning message appears instead.
There is
If you are
IPSec Commands
OPTIONAL
251