IP Commands
ip sendto
Send UDP packets.
SYNTAX:
ip sendto
where:
addr
count
size
interval
listen
srcport
dstport
EXAMPLE:
=>ip sendto addr=10.0.0.148 listen=on srcport=19 dstport=1025
=>ip sendto addr=10.0.0.148 listen=on srcport=19 dstport=1025
1 bytes from 10.0.0.148:1025
41
=>ip sendto addr=10.0.0.148 count=3 listen=on srcport=19 dstport=1025
1 bytes from 10.0.0.148:1025
41
1 bytes from 10.0.0.148:1025
41
1 bytes from 10.0.0.148:1025
41
=>
RELATED COMMANDS:
ip ping
214
addr = <ip-address>
[count = <number{1-1000000}>]
[size = <number{1-20000}>]
[interval = <number{100-1000000}>]
[listen = <{off|on}>]
[srcport = <number{1-65535}>]
dstport = <number{1-65535}>
The destination IP address.
A number between 1 (default) and 1000000.
Represents the number of UDP packets to send.
A number between 1 (default) and 20000 (bytes).
Represents the size of the ping packet(s).
A number between 100 (default) and 10000000 (milliseconds).
Represents the intermediate interval between two sent UDP packets.
Listen for incoming UDP packets (on) or only send UDP packets (off).
The default is off.
The UDP source port number to use.
The UDP destination port number to send to.
Send ICMP ECHO_REQUEST packets.
A
A
A
A
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
REQUIRED
E-DOC-CTC-20040216-0002 v1.0